Server Help

nosut4321 · Posted: Sun Mar 16, 2003 7:43 pm Post subject: cant get the biller working

server only starting in stand alone mode wont connect to biller

Dr Brain · Posted: Sun Mar 16, 2003 8:07 pm Post subject:

Is the biller running? Do the config files match?
_________________
Hyperspace Owner

Smong> so long as 99% deaths feel lame it will always be hyperspace to me

nosut4321 · Posted: Sun Mar 16, 2003 8:08 pm Post subject: ........

yes the sysop pw is matched the biller pw is matched the port is match whatelas doi need

Gravitron · Posted: Mon Mar 17, 2003 2:48 am Post subject:

What sysop pw?
There's no sysop pw that needs to be matched to the biller.
Server.ini [pasword] sysoppassword is to set access pw for zone's sysop.
Subbill.ini sysoppassword is to set access pw for the entire biller's sysop.
They're two complete different things.

As for the biller not connecting...
Noteable HotSpots
At server.ini under [billing]:
* IP is to be set to "localhost" not 127.0.0.1.
* ServerID must match the specified Port under server.ini [misc].
* Password must match the specified BillingPassword at subbill.ini.

At server.ini under [misc] Port must not be a number which is one above or one below the Port specified at subbill.ini.

At subbill.ini AllowNewUsers should be set to 1.