Server Help

Dave · Guest Offline

I've followed all the directions exactly from www.shanky.com/server ... I've read the router sticky and have fixed my router just like it said ... but it WON'T WORK!! =(

My firewalls are off, I can connect to the Billing Server, but my zone is ALWAYS red in the Zone List..

What other possibilities are there?!

Paine · Posted: Fri May 21, 2004 5:15 am Post subject:

run both subbill and subgame
Remove your zone from the list
re-add your zone.

try that...

Dave · Guest Offline

I've tried that many times.. it still doesn't work. =(

Dr Brain · Posted: Fri May 21, 2004 1:20 pm Post subject:

Add a custom zone entry with 127.0.0.1 as the IP
_________________
Hyperspace Owner

Smong> so long as 99% deaths feel lame it will always be hyperspace to me

Qndre · Posted: Fri May 21, 2004 1:46 pm Post subject:

Can you connect to the zone even if it's red? If you can then it's just the ping which is cut off and not the game packets. If you can't then you are fully cut off, don't know what it may be or not be...

*sry*

Cyan~Fire · Posted: Fri May 21, 2004 4:37 pm Post subject:

If he has a router, he doesn't need to worry about firewalls.
_________________
This help is informational only. No representation is made or warranty given as to its content. User assumes all risk of use. Cyan~Fire assumes no responsibility for any loss or delay resulting from such use.
Wise men STILL seek Him.

Kyn · Guest Offline

I have the same problem.
I change it to 127.0.0.1 it shows up green but when I try to connect it doesnt work.
on the subgame2 it keeps saying Client connection request from billing server ignored.

Cyan~Fire · Posted: Fri May 21, 2004 6:46 pm Post subject:

In your server.ini, is Billing:IP=localhost?

Kyn · Guest Offline

Well it was oriignally at 127.0.0.1
I changed it to local host now. It shows me user database and pw and stuff but now my subgame cant connect to my billing server?

Dave · Guest Offline

Does anyone have a NetGear router?

Kyn · Guest Offline

Well I fixed it and its working fine. All I need is for osmeone to host it.

Help I need now is how to edit the server.cfg thing. anyone got a link to help or anything?

Twerp · Guest Offline

I got netgear and I can't seem to get my zone out of the red. PLEASE HELP ME!!!

Cyan~Fire · Posted: Fri May 21, 2004 10:49 pm Post subject:

Search.

Dave · Guest Offline

Dr Brain · Posted: Sat May 22, 2004 12:32 am Post subject:

Set

IP=localhost

under [Billing] in server.ini.

Dave · Guest Offline

Dr Brain · Posted: Sat May 22, 2004 11:20 am Post subject:

What does it say on the server window when you try and connect?

Dave · Guest Offline

In the Subbill it says "Unknown packet type: 36"

What does that mean? =\

Mine GO BOOM · Posted: Sun May 23, 2004 5:57 pm Post subject:

In your server.ini file, change your [Misc] Port= to a different number, something like 5500 or any big number between 1000 and 20000.

Dr Brain · Posted: Sun May 23, 2004 7:31 pm Post subject:

And of course update your custom zone entry.

wEaViL · Posted: Sun May 23, 2004 7:34 pm Post subject:

One thing I did was connected the server to the dsl or cable modem and then made sure it ran with that.. that will help you figure out if its a router setup issue or if its a cfg issue. If it works then check your router settings. If they appear to be correct and it dont work go to netgears website and search the support section for you router model number and look for how to forward ports and make sure theres no extra steps in there.

Dave · Guest Offline

Well, I can actually test my zone now! =)

Still having trouble with the router... I'll try searching NetGear's website.

Thanks for the help everyone =)