Server Help

Light Hazard · Guest Offline

Okay, I uploaded the zone. Everything is working fine. I am inside working on my settings. I tell my friend to come in, it tells him the zone is still red...wtf? How do I fix that? I have fixed my router, no firewall running, or anything of that sort. What do I do?

Dr Brain · Posted: Tue Jun 08, 2004 1:42 pm Post subject:

Add a custom zone entry with 127.0.0.1 as the IP.

Make sure your IP under the [billing] section in server.ini is "localhost" (no quotes).
_________________
Hyperspace Owner

Smong> so long as 99% deaths feel lame it will always be hyperspace to me

Guest · Offline

there

Guest · Offline

Cyan~Fire · Posted: Tue Jun 08, 2004 1:52 pm Post subject:

OK, those are images that I asked him to post. He's been able to get in using a custom entry, but nobody else can. I can't figure it out at all.
_________________
This help is informational only. No representation is made or warranty given as to its content. User assumes all risk of use. Cyan~Fire assumes no responsibility for any loss or delay resulting from such use.
Wise men STILL seek Him.

Light Hazard · Guest Offline

Fixed.

Dr Brain · Posted: Tue Jun 08, 2004 5:58 pm Post subject:

Yah, I read your question wrong. Sorry.

-Smong- · Guest Offline

Linksys has limited the NAT to 10 entries only? At least it has port ranges unlike Alcatel.

wEaViL · Posted: Tue Jun 08, 2004 8:21 pm Post subject:

even though he fixed it imma let everyone know that there are 2 things that can cuase this problem if your router is setup right. 1 firewalls will make it apear red to others unless you set the firewall to ignore the 2 ports, and 2 linksys and some others have a function in the setup called block wan request, if that is enabled then it will show up red to others.