Server Help

BlueDragon · Posted: Wed Mar 10, 2004 9:48 pm Post subject: Server prob

I am trying to host my own servr...again. Ok I have read through the linksys help and no solution. But I had it working once but then I did something that messed it up which I dont know what it was. Under the server.ini on both port sections at first when it worked it was Misc [Port]=185 and the other was port 185. Subbill.ini was 185 and thats when it worked. But now when I change it back it doesnt work. Any solutions?
_________________

Cyan~Fire · Posted: Wed Mar 10, 2004 10:12 pm Post subject:

Your biller and server ports need to be different.
_________________
This help is informational only. No representation is made or warranty given as to its content. User assumes all risk of use. Cyan~Fire assumes no responsibility for any loss or delay resulting from such use.
Wise men STILL seek Him.

BlueDragon · Posted: Wed Mar 10, 2004 10:14 pm Post subject:

ok so if i pust in the subbill.ini 185 and in the server.ini both 382 will it work?

Dr Brain · Posted: Wed Mar 10, 2004 10:26 pm Post subject:

No.

Put the billing port (in server.ini) to 185.

Put the misc port to whatever (382 you said).
_________________
Hyperspace Owner

Smong> so long as 99% deaths feel lame it will always be hyperspace to me

BlueDragon · Posted: Wed Mar 10, 2004 11:06 pm Post subject:

Still no luck. Dont know why its no working.

wEaViL · Posted: Wed Mar 10, 2004 11:44 pm Post subject:

Attach your server.ini and biller.ini files to a post in here without the passwords so we can look at it to find the problem.

BlueDragon · Posted: Thu Mar 11, 2004 12:38 am Post subject:

ok here they are.

wEaViL · Posted: Thu Mar 11, 2004 1:34 am Post subject:

K found your problem... you had the server port set to 4483 in the misc section of the server.ini.... but in the

Code: Show/Hide

Billing section...
ServerId=483
//Make the same as in [Misc] Port=
GroupId=1
ScoreId=0
//Make the same as in [Misc] Port=

So I changed your ports to 1000.... so now then server ports are

Code: Show/Hide

MISC
Port=1000
BILLING
ServerId=1000
//Make the same as in [Misc] Port=
GroupId=1
ScoreId=1000
//Make the same as in [Misc] Port=

All you have to do now is just put your passwords back in and put your server ip back in the server.ini misc section.... should work then.

BlueDragon · Posted: Thu Mar 11, 2004 2:07 am Post subject:

Thanks at least now it shows on my LAN ip but still stays red on my real ip.

wEaViL · Posted: Thu Mar 11, 2004 2:24 am Post subject:

Using a router? Dont forget to forward the port 1000 and 1001 to the ip of the ss server.

BlueDragon · Posted: Thu Mar 11, 2004 9:01 am Post subject:

I did but not sure MSN DSL lets you run any type of server since when I type my real ip in and it takes me to the stats of the internet.

wEaViL · Posted: Thu Mar 11, 2004 12:37 pm Post subject:

I dont know much about dsl but you might be able to call them and find out if they block it or not.

Cyan~Fire · Posted: Thu Mar 11, 2004 4:42 pm Post subject:

They can't tell whether you're running a server or not. If you're behind a router, that's your problem.

BlueDragon · Posted: Thu Mar 11, 2004 5:35 pm Post subject:

I tried it without my router still no luck but oh well I have a great host anyways so no worry for me.