Server Help

Kitsune · Guest Offline

My zone shows up red, and i'm not using a router.....

Contempt+ · Posted: Mon Nov 21, 2005 2:02 pm Post subject:

User error
_________________
SSE Network Administrator

Kitsune (^) · Posted: Mon Nov 21, 2005 5:24 pm Post subject: User error?

??? User error???

Please explain more clearly.
_________________
If (Pi=Infinite 3 Infinitity)
Carpe diem!
Know thyself.

Mine GO BOOM · Posted: Mon Nov 21, 2005 11:50 pm Post subject:

Look over all the topics covered here. Try out what is listed in there, and if none work, respond back with which ones you tried. Also, answer this short list of questions:

Is Continuum, Subgame, and Subbill all running on the same system?

Have you tried to get another person to connect to your zone?

Do you know what port forwarding is, and do you know how to forward ports on your router? - Sorry, just copied/pasted from previous help reply.

Contempt+ · Posted: Tue Nov 22, 2005 7:38 am Post subject:

Kitsune (^) · Posted: Tue Nov 22, 2005 7:20 pm Post subject: ok

...

Okay.... anyone else? I can get people to connect to my zone, and i AM runnng subgame, subbill, and MERV on my compy.

xsp0rtsfanx · Posted: Fri Nov 25, 2005 7:14 pm Post subject:

i'm not running on a router and heres what i did. do start --> run type in cmd. that will bring up the command prompt. after that type ipconfig in command prompt. you should get a website you can edit your stuff on OR just put the ip address in any internet browswer. then you have to login (my guess is password or admin if it has never been touched) and then dont use ftp when forwarding the port. make the port start number the port of your zone and the port end number one number higher. i think thats it

Solo Ace · Posted: Sat Nov 26, 2005 2:43 am Post subject:

GTFO MGB, YAMS YAMS YAMS IN YOUR FACE.

wtf no ur rong, u have to ftp n put the ip of your internet browser in ur ftp and then forward it to ip in ipconfig...

Kitsune, did you get it fixed? If not, try adding a "Custom zone" in Continuum. This can be found in the same window where you can update your zone list.

For the custom zone, use the following info:
IP address: 127.0.0.1
Port: <The port number you picked to run your zone on ([Misc]Port in server.ini, this has to be the same>
Name: <Anything you'd like>

Now this new entry should appear on your zone list.
It points to the same zone people can enter from the Internet, you just have to use that entry instead.
Try entering it and see if you get into the zone.

That should fix your problem. If it doesn't you should post more information about your problems, network setup and configurations.