Server Help

Cyan~Fire · Posted: Sat Aug 23, 2003 9:50 am Post subject:

OK with ipconfig, first you need to get to a command prompt (run 'cmd).

Billing server: I think you must have changed the wrong port.
Subbill.ini:Misc:Port=
should be the same as:
Server.ini:Billing:Port=
and DIFFERENT from:
Server.ini:Misc:Port=

If I were you, I would copy your server.cfg (if you've changed anything). And re-extract server.zip over your current folder. Then everything should work, and then you can re-customize.
_________________
This help is informational only. No representation is made or warranty given as to its content. User assumes all risk of use. Cyan~Fire assumes no responsibility for any loss or delay resulting from such use.
Wise men STILL seek Him.

got answers? · Guest Offline

why does the numbers suddenly slowed down when i opened my subgame2.exe?

got answers? · Guest Offline

thx now i can c my ipconfig thing

got answers? · Guest Offline

which ip do i use

the ip address

the subnet mask or

the defualt gateway

Cyan~Fire · Posted: Sat Aug 23, 2003 5:46 pm Post subject:

If your ip address is 192.168.1.something, then you're behind a router. Is it?

Numbers slow down probably because your CPU now has to deal with subbill AND subgame2, nothing to worry about.

AlphaBoB · Posted: Sat Aug 23, 2003 5:52 pm Post subject:

Not nessecarily, Cyan~Fire. It can either mean that you are behind a router or that you are on a network. In my case it's both.

We had 192.168.1.(blah) waaay before we got cable and a router, because we had a local area network (LAN)

AlphaBoB · Posted: Sat Aug 23, 2003 5:55 pm Post subject: Re: ipconfig

got answers? · Guest Offline

that means i am behind a router........lol.....i'm soo stupid

so i use the 192.168.1.something for the [misc]server ip or [billing] ip

Cyan~Fire · Posted: Sat Aug 23, 2003 6:07 pm Post subject:

No. Use Mine's favorite, www.whatismyip.com, or my way (if you use a Linksys router) of just going to the status page. But my way requires a bit more geekiness.

AlphaBob: Since he said he used cable, not dial-up, then if he's on a network, he uses a router. Just trying to put 2-and-2 together, but maybe I came up with 3...

got answers? · Guest Offline

so i shoud use the ip address from www.whatismyip.com and put the ip address on the [misc]server ip or [billing] ip

my router is not the Linksys router, i think

mine is a old one, i think

its silver like, i think

got answers? · Guest Offline

so do i use the ip address from www.whatismyip.com and put the ip address on the [misc]server ip or [billing] ip

Cyan~Fire · Posted: Mon Aug 25, 2003 4:28 pm Post subject:

Put the 'whatismyip' in Misc:ServerIP
Put 127.0.0.1 in Billing:IP

got answers? · Guest Offline

u no the ports.....

do i put like 1000 in the [misc] port, then i put 1100 [Billing] port

or should i put 186 on the [Billing] port???

and put 1000 in my [Billing] serverid and scoreid???
----------------------------------------------------------------------------------
and what's for the [Directory] namepassword?

got answers? · Guest Offline

my subgame2.exe keeps saying:

Thu Aug 28 00:17:25: Attempting to establish link to billing server...
Thu Aug 28 00:17:45: Attempting to establish link to billing server...
Thu Aug 28 00:18:05: Attempting to establish link to billing server...
Thu Aug 28 00:18:25: Attempting to establish link to billing server...
Thu Aug 28 00:18:29: ERROR: Could not connect to billing server.
Thu Aug 28 00:18:29: Starting server in stand-alone mode.

then my subbill say this and doesnt list any errors:

Thu Aug 28 00:17:14 2003
: SubSpace Billing Server v0.23

and the subbill.exe numbers now go like 1...............................2..............................3...............................4
instead of 12345678910

but then when i close the subgame2.exe, my subbill.exe's numbers go bak to the normal fast speed...

Cyan~Fire · Posted: Thu Aug 28, 2003 4:24 pm Post subject:

Subbill.ini:Port
and
Billing:Port need to be the same.

If nothing works, delete your directory and re-extract server.zip.
If you've made any changes to your cfg, then back it up.

got answers? · Guest Offline

i tried but one of the settings that i changed....i think screwed it up

got answer? · Guest Offline

soo bored...buzy...y

Cyan~Fire · Posted: Mon Sep 08, 2003 4:13 pm Post subject:

Your cfg shouldn't make any difference with your server connecting to biller.
Then it's probably a problem with Windows.
Try Linux with ASSS

got answers? · Guest Offline

i'll try that sometime when i'm not buzi